Section 3 - On the Water
Page 56 90-899883295 JUNE 2008
6. To disengage auto heading, turn the steering wheel or press the "AUTO HEADING"
button. A single beep sounds when it disengages. If the steering wheel is used to
disengage auto heading, the "RESUME" button LED turns on and a single beep
sounds. While the LED is lit, you can press the "RESUME" button to resume auto
heading.
a - Port "TURN" button
b - Starboard "TURN" button
c - "RESUME" button
d - "AUTO HEADING" button
7. If the ERC handles are moved to neutral, Auto Heading turns off, a single beep sounds,
and the "STANDBY" light turns on. You cannot resume your course by pressing the
"RESUME" button.
a - "OFF" button
b - Current heading
c - Drive positions
d - Engine RPM
To Next Page
Loading...
