Section 5 - Alert Configuration
Page 38 90-8M0072763 eng JUNE 2012
GeoFence Notifications
Type of Boundary How is Message Initiated Message Sent
Where
Recorded
Containment Fence
Boundary set by customer
on website
Website server detection
Fence boundary is crossed. Timing of
alert message may not coincide with
time of crossing.
Attention: Mercury TDS Premium
reports the boat has entered the
containment geofence (name) on (date
and time)
GeoFence
Log
Attention: Mercury TDS Premium
reports the boat has exited the
containment geofence (name) on (date
and time)
Hazard Fence
Boundary set by customer
on website
Website server detection
Fence boundary is crossed. Timing of
alert message may not coincide with
time of crossing.
Attention: Mercury TDS Premium
reports the boat has entered the
hazard geofence (name) on (date and
time)
GeoFence
Log
Attention: Mercury TDS Premium
reports the boat has exited the hazard
geofence (name) on (date and time)
Assistance Notification
Type of
Assistance
Description of
Action
How Activated Message Sent
Where
Recorded
Emergency
Assistance
Emergency
notification
requested by
vessel
Press and hold the H
button for six seconds
on Operator Interface
Attention: Mercury TDS Premium reports
the boat has detected Assistance
Requested on (date, time latitude,
longitude). That location is approximately
(xxx) miles from address.
Alert Log
Emergency
Assistance
Clear
Emergency
notification clear
requested by
vessel
Press and hold the H
button for six seconds
on Operator Interface
Attention: Mercury TDS Premium reports
the boat has detected Assistance
Requested Clear on (date, time latitude,
longitude). That location is approximately
(xxx) miles from address.
Help Button
The user interface has a help button that can activate a request for assistance. The address location (e‑mail or sms [text]) to
receive the request for assistance must be configured and assigned on the website in the Assistance List section.
Help Button Function
• Hold the H (help) button for six seconds to activate a request for assistance. The screen will display HELP SEND indicating
the TDS has requested assistance.
• When the request has been sent, the screen will change to HELP SENT.
• When the request for assistance is received by the Iridium satellite server, the server will send out an e‑mail or a sms (text)
alert message to all addresses listed on the Assistance List. The server will send a response message to the user interface
to indicate the request for assistance has been received and is logged into the server. The server will send the response
message (HELP RECV) to the user interface even if no address or sms is configured in the Assistance List. E‑mail
addresses must be configured on the Notifications page to support this function.
To Next Page
Loading...