Mercury TDS - Cable and Harness Connection Diagram; System Check

Section 2 - Installation
Page 16 90-8M0072763 eng JUNE 2012
Cable and Harness Connection Diagram
a - Mobile transceiver unit (MTU)
b - Iridium satellite antenna
c - GPS antenna
d - User interface
e - Power harness
f - SmartCraft harness
g - 5 amp fuse
h - Battery
i - Junction box
System Check
1. When the power harness is connected to a battery source with the user interface connected, the display on the interface
should show COMM or no COMM.
NOTE: The vessel must have an unblocked view of the sky. If the vessel is beneath a metal or metallic coated roof, the
antenna will not be able to communicate with the satellite.
a
b
c
d
e
f
g
h
i
49870