Need help?Do you have a question about the Mercury TDS and is the answer not in the manual?
Important disclaimer regarding the use and limitations of the Mercury TDS.
Information regarding FCC compliance and regulations for the equipment.
Instructions and importance of dealer registration for system activation.
Step-by-step guide for registering the product online.
Details on data collection, usage, and sharing by Mercury Marine.
Overview of the TDS Premium system with connected vessel capabilities.
Prerequisites and hardware needed for installing the TDS-Premium system.
Explanation of how the TDS-Premium system functions and its capabilities.
Specific guidance on physically installing system components and routing wires.
How to use the key fob to arm, disarm, and control the TDS-Premium system.
Specific procedures and considerations for transporting the vessel with the TDS.
General instructions for installing the key fob component of the TDS.
Best practices for routing and securing system harnesses.
Safety and damage prevention guidelines for electrical wiring.
Step-by-step guide for mounting the docking station.
Instructions for mounting the main TDS module.
Detailed diagrams and instructions for connecting system wiring.
Common issues and solutions for the TDS-Premium system.
Overview of TDS-Premium installation, components, and prerequisites.
Visual diagram illustrating system cable and harness connections.
Procedures to verify the correct operation of the installed system.
Final steps for physically securing the installed TDS-Premium components.
Instructions for accessing and logging into the online tracking portal.
Introduction to the primary interface for managing TDS data.
Displays the vessel's last known position and map-based tracking features.
Real-time tracking function to monitor the vessel's current location and movement.
Accessing archived historical data and event logs from the system.
Reviewing recorded alerts, their types, timestamps, and status.
Records of vessel interactions with user-defined virtual boundaries (GeoFences).
Historical data on engine performance metrics like RPM and hours.
Records of engine faults and related diagnostic information.
Feature for creating and managing virtual boundaries (GeoFences) for alerts.
Step-by-step process to define new containment or hazard boundaries.
Procedures for modifying or removing existing GeoFence boundaries.
Setting up email and SMS addresses for receiving system alerts.
Explains alert types, triggers, messages, and where they are recorded.
Configuration details for alerts related to GeoFence boundary breaches.
Setting up and managing requests for assistance via the system.
Information on using the help button on the operator interface.
Detailed explanation of the help button's functionality and response.
Answers to common user questions about system features, charges, and operation.
A section designated for important notes and record-keeping.
To Next Page
General