Follow the on‑screen instructions to complete the trim up adapt. Press the Enter button to continue.
VesselView will display the Major Profile screen when trim down and trim up adapt is complete. There is no need to calibrate
each of the five major trim profiles. The trim down adapt and trim up adapt applies the trim readings to all five of the profiles. To
exit the active trim portion of the setup wizard, press the Menu button.
Active trim setup is complete.
Finishing Setup Wizard
To complete the Setup Wizard process, press the Enter button.
Setup wizard complete
Section 2 - Initial Screens and Setup Wizard
90-8M0124182 eng DECEMBER 2017 Page 19
To Next Page
Loading...
