a - Fault code
b - Corrective action text
c - Short text of fault
d - Descriptive fault text
e - Enter—to clear faults
Troll
Troll RPM ranges are power package dependent. The maximum troll RPM for all engines or outboards is 1000 RPM.
The vessel must be in gear and the throttle must be at idle. If the vessel does not meet these conditions, a warning icon and
accompanying text will instruct the operator on how to make troll control available.
When the desired RPM value has been chosen, press the Enter button to enable troll. This will start troll control and the
engines will rev to the desired RPM.
The top of the VesselView screen will display a warning symbol and the text troll active.
Section 3 - Main Menu Selections
90-8M0124182 eng DECEMBER 2017 Page 39
To Next Page
Loading...
