Mercury VesselView 403 - Restore; Network

Restore
Restore will reset all of the customized settings on the VesselView. Checking the Local settings option will restore the settings
on only the VesselView unit that is being used by the operator. Checking the Simnet global reset will reset all of the Simrad and
Navico devices, as well as all of the VesselView units connected to the NMEA 2000 network.
64988
Network
Selecting the Network option allows the operator to auto select devices on the SmartCraft and NMEA 2000 networks, reset
local or global settings, define data source communication paths, display the current device list and perform diagnostics.
64992
Network options
Within the Network settings is the Data sources tab.
Using the Down arrow button scroll to the Data sources option.
64855
Section 3 - Main Menu Selections
90-8M0124182 eng DECEMBER 2017 Page 47