Vessel
Vessel settings apply to sensors and senders on the boat that are separate from the engine package. Depending on how the
vessel is rigged, some options may not be active. Items in the vessel settings include: Tabs, Tanks, Speed, Steering, Sea
Temperature Source, and Joystick Installed.
Tabs
The Tabs option allows the operator to select the CAN bus that will transmit tab data, as well as selecting the engine which
controls the tabs through the helm controls.
Checking the Show option will display tab position on the screen.
Tanks
Tank configuration is covered in the setup wizard, but changes to the number, volume, and type of tanks, can be changed at
any time.
Section 3 - Main Menu Selections
Page 50 90-8M0124182 eng DECEMBER 2017
To Next Page
Loading...
Need help?
General
