Time
Time is controlled by the vessel's GPS unit. When a GPS fix is established, the time display will be updated automatically. A
local time offset can set the time from the time zone of departure, or the time zone of arrival if needed. In the time offset screen,
use the buttons to navigate through the active data fields and apply the desired time offset. Highlight Save and press the Enter
button to keep the changes. For detailed instructions of activating the data fields, refer to Entering Text and Numbers. Time
format can be selected as 12 or 24 hour display. Date format can be changed according to an operator's preference. This can
be important when viewing a list of faults, where the date and time of the fault is recorded and displayed. Highlight the Save
option and press the Enter button to save all selections.
Time and date options
Time offset in hours and minutes
Check for Updates
Check for updates will query the internet for VesselView software updates. For detailed instructions refer to Section 4 ‑
Updating through a Wi‑Fi Connection.
Section 3 - Main Menu Selections
90-8M0124182 eng DECEMBER 2017 Page 49
To Next Page
Loading...
Need help?
General
