These types of faults will not turn the Mercury tab to red. Instead, the upper header bar will turn red and display the
international warning symbol.
In the Settings menu, select the Alarms option.
Press the Enter button. Select the Settings option within the Alarms screen.
In the Alarms/Settings screen there are numerous data items that can be customized by the operator. To select a data item,
use the Up arrow and Down arrow buttons to highlight an item. With the item desired and highlighted, press the Enter button.
In the data item settings screen, there will be several fields:
• Enable—allows VesselView to monitor this data value
• Data Value—allows an increase or decrease in the value that will trigger a fault
Section 3 - Main Menu Selections
90-8M0124182 eng DECEMBER 2017 Page 55
To Next Page
Loading...
Need help?
General
