EasyManuals Logo

Mercusys MR30G User Manual

Mercusys MR30G
77 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #26 background imageLoading...
Page #26 background image
17
Chapter 4 Congure the Router in Wireless Router Mode
Username/Password - Enter the username and password provided by your ISP. These
fields are case-sensitive.
VPN Server IP/ Domain Name - Enter the VPN server’s IP address or domain name
provided by your ISP.
MTU Size - The default MTU size is “1420” bytes, which is usually fine. It is not
recommended that you change the default MTU Size unless required by your ISP.
Connection Mode
Auto - In this mode, the internet connection reconnects automatically any it gets
disconnected.
On Demand - In this mode, the internet connection will be terminated automatically
after a specified inactivity period (Max Idle Time) and be re-established when you
attempt to access the internet again.
Manual - In this mode, the internet connection is controlled manually by clicking the
Connect/Disconnect button. This mode also supports the Max Idle Time function
as On Demand mode. Enter a maximum time (in minutes), the internet connection
can be inactive before it is terminated into the Max Idle Time. The default value is
15 minutes. If you want the internet connection remains active all the time, enter 0
(zero).
Note:
Sometimes the connection cannot be terminated although you have specified the Max Idle Time because some applications
are visiting the internet continually in the background.
4. 2. 3. MAC Clone
1. Visit http://mwlogin.net, and log in with the password you set for the router.
2. Go to Advanced > Network > Internet and locate the MAC Clone section.
3. Configure Router MAC Address and click SAVE.
Use Default MAC Address - Do not change the default MAC address of your router
in case the ISP does not bind the assigned IP address to the MAC address.

Other manuals for Mercusys MR30G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mercusys MR30G and is the answer not in the manual?

Mercusys MR30G Specifications

General IconGeneral
DSL WANNo
Ethernet WANYes
WAN connection typeRJ-45
Wi-Fi bandDual-band (2.4 GHz / 5 GHz)
Wi-Fi standards802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Top Wi-Fi standardWi-Fi 5 (802.11ac)
WLAN data transfer rate (max)1167 Mbit/s
WLAN data transfer rate (first band)300 Mbit/s
WLAN data transfer rate (second band)867 Mbit/s
Antennas quantity4
Antenna gain level (max)5 dBi
Cabling technology10/100/1000Base-T(X)
Receiver sensitivity11g 6Mbps: -96dBm 11g 54Mbps: -78dBm 11n HT40 MCS7: -74dBm 11n HT20 MCS7: -71dBm 11a 6Mbps: -97dBm 11a 54Mbps: -79dBm 11ac VHT20 MCS8: -74dBm 11ac VHT40 MCS9: -70dBm 11ac VHT80 MCS9: -65dBm
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
Firewall securitySPI Firewall, IP/MAC Address Binding
NAT functionalityPort Forwarding, Port Triggering, UPnP, DMZ
Security algorithmsWPA-PSK, WPA2-PSK
Supported network protocolsPPPoE/L2TP/PPTP
Cables includedLAN (RJ-45)
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)5 - 90 %
Operating relative humidity (H-H)10 - 90 %
Power source typeAC
Ethernet LAN (RJ-45) ports3
Package typeBox
Product typeTabletop router
Product colorBlack
LED indicatorsStatus
Weight and Dimensions IconWeight and Dimensions
Depth125.9 mm
Width159.7 mm
Height37.1 mm

Related product manuals