Mercusys MR30G - Appendix B: Configuring the PC

67
AC1200 Wireless Dual Band Gigabit Router
MR30G
Appendix B: Conguring the PC
In this section, we’ll introduce how to install and congure the TCP/IP correctly in
Windows 7. First make sure your Ethernet Adapter is working, refer to the adapter’s
manual if needed.
1. Install TCP/IP component
a. On the Windows taskbar, click Start button, and then click Control Panel.
b. Click the Network and Internet, and click the Network and Sharing Center,
then click Change adapter settings.
c. Right click the icon that showed below, select Properties on the prompt page.
d. In the prompt page that showed below, double click on the Internet Protocol
Version 4 (TCP/IPv4).
e. The following TCP/IP Properties window will display and the IP Address tab is
open on this window by default.