Metapace S-2 - Code 39; Start;Stop Transmission; Verify Check Digit

113
Update
Chapter 4
Changing Symbology Settings
4.5 CODE 39
4.5.1 START/STOP TRANSMISSION
Decide whether to include the start/stop characters in the data being transmitted.
4.5.2 VERIFY CHECK DIGIT
Decide whether to verify check digit. If incorrect, the barcode will not be accepted.
*Enable Code 39
D
isable Code 39
Transmit Code 39
Start/Stop Characters
*
Do Not Transmit
Verify Code 39
Check Digit
*
Do Not Verify