Metapace S-2 - Convert to EAN-13; System Number Transmission; Transmit Check Digit

135
Update
Chapter 4
Changing Symbology Settings
4.18.1 CONVERT TO EAN-13
Decide whether to expand the read UPC-A barcode, as well as its addons, into EAN-13.
 After conversion, the data follows EAN-13 format and is affected by EAN-13
programming selections (e.g. Check Digit).
4.18.2 SYSTEM NUMBER TRANSMISSION
Decide whether to include the system number in the data being transmitted.
4.18.3 TRANSMIT CHECK DIGIT
Decide whether to include the check digit in the data being transmitted.
Convert UPC-A
to EAN-13
*
Do Not Convert
D
o Not Transmit
*Transmit UPC-A
Check Digit
D
o Not Transmit
*Transmit UPC-A
System Number