Metapace S-2 - Page 194

184
Enter Setup
Metapace S-2 Hardware Manual
Electrical Characteristics
Battery Rechargeable Li-ion battery – 3.7 V, 800 mAh
DC 5V ± 5% (with adaptor)
Power Adapter
Input AC 100~240 V, 50/60 Hz
Output DC 5V ± 5% (with adaptor via the cradle)
Environmental Characteristics
Temperature Operating
Storage
0 °C to 50 °C
-20 °C to 60 °C
Humidity
(Non-condensing)
Operating
Storage
10% to 90%
5% to 95%
Resistance
Impact Resistance 1.5 m, 5 drops per 6 sides
Electrostatic Discharge ± 15 kV air discharge, ± 8 kV contact discharge
Programming Support
Configuration via Setup Labels Use setup labels or host serial commands.
Software Windows
®
-based software Metapace S-2.exe
Accessories (√ means “supported”)
Rechargeable Li-ion Battery
√
Charging & Communication
Cradle
√
Note: The cradle is not only for use with Auto-Sense mode and capable of charging the
scanner, but specifically designed for the scanner to communicate with a host
computer wirelessly.