METER AQUALAB PAWKIT User Manual

5
PAWKIT
2. Place the prepared sample cup onto a level surface.
Sample cup
Figure3 Sample cup placement
3. Place the opened PAWKIT onto the prepared sample cup.
The cup fits under the sensor into a recess in the bottom of the PAWKIT.
Figure4 PAWKIT placement on sample cup
A correctly positioned cup results in the PAWKIT being level on the bench when sitting on
the cup and the sensor cover legs. Ensure the rim of the cup is entirely within the recess
of the sample chamber (Figure4). Otherwise, the PAWKIT may not be level on the bench,
and the cup might not make a vapor seal with the sensor.

METER AQUALAB PAWKIT Specifications

General

Brand	METER
Model	AQUALAB PAWKIT
Category	Measuring Instruments
Language	English