Metra Electronics 95-8202 - Stacked ISO DIN Radio Provision Assembly

17
Kit Assembly 95-8202
Stacked ISO DIN radio provision Notes
1. Locatethefactorywiringharness
inthedash.Metrarecommends
usingthepropermatingadapter
fromMetraorAXXESS.Re-connect
thenegativebatteryterminaland
testtheunitforproperoperation.
2. Attachthefactorymounting
bracketsandthe95-8202double
DINtrimplatestothestacked
ISODINradioswiththescrews
suppliedwiththeunits.(FigureA)
NOTE: Remove locating
pins from factory brackets
with grinder.
4. Reassembledashinreverseorder
ofdisassembly.
(Figure A)
Factory
brackets may differ