MI 3201 TeraOhm 5 kV Plus Instrument Description
6
2.3 Connectors
The TeraOhm 5 kV Tester contains the following connections:
- Connection of test leads to four banana safety sockets (Fig. 2),
- Mains supply cable connection to the mains socket and communication socket (USB
and RS232) (Fig. 3).
Fig. 2. Test leads connector
1.......... Negative Insulation Resistance test terminal. (-OUT)
2.......... GUARD test terminals intended to lead away potential leakage current while
measuring the Insulation. Both green sockets are connected together inside the
instrument.
3.......... Positive Insulation Resistance test terminal (+OUT)
Use original test accessories only!
Max. allowed external voltage between test terminals and ground is 600V!
Max. allowed external voltage between test terminals is 600V!
To Next Page
Loading...
