MI 3201 TeraOhm 5 kV Plus Instrument Description
7
Fig. 3. Communication and Mains connector
1.......... Galvanic separated RS232 connector to connect the instrument to PC.
2.......... Galvanic separated USB connector to connect the instrument to PC.
3.......... Mains connector to connect the instrument to the mains supply.
Use original mains supply cable only!
2.4 Accessories
The accessories consist of standard and optional accessories. Optional accessories can
be delivered upon request. See attached list for standard configuration and options or
contact your distributor or see the METREL home page: http://www.metrel.si.
2.5 Test leads
The standard length of test leads is 2m, optional lengths are 8m and 15m. For more
details see attached list for standard configuration and options or contact your
distributor or see the METREL home page: http://www.metrel.si.
All test leads are made of high voltage shielded cable, because shielded cable provides
higher accuracy and immunity to disturbance of measurements that can occur in
industrial environment.
To Next Page
Loading...
Need help?
General
