MI 3201 TeraOhm 5 kV Plus Specifications
48
8.2 General specifications
Battery power supply ..................................... 7.2 V DC (6 × 1.2V
DC
NiMH C size)
Mains power supply....................................... 90-260 V AC, 45-65 Hz, 40 VA
(300V CAT III)
Protection classification ................................. double insulation
Over-voltage category ................................... 600 V CAT IV
Pollution degree............................................. 2
Degree of protection ...................................... IP 40 with case closed
Dimensions (w × h × d).................................. 31 x 13 x 25 cm
Weight (without accessories, with batteries).. 3 kg
Visual and sound warnings............................ yes
Display........................................................... LCD dot matrix with backlight - (160x116)
Memory.......................................................... Non-volatile internal memory,
....................................................................... 1000 numerical measurements with time
....................................................................... and date.
ENVIRONMENT CONDITIONS
Working temperature range........................... -10 50 °C
Nominal (reference) temperature range......... 10 30 °C
Storage temperature range............................ -20 +70 C.
Maximum humidity ........................................ 90% RH (0 40 °C) non-condensing
Nominal (reference) humidity range............... 40 60 % RH
Nominal altitude............................................. up to 2000m
AUTO-CALIBRATION
Auto-calibration of measuring system............ every time after turning power on
CONNECTING SYSTEM
Two safety banana sockets ........................... +OUT, -OUT (10kV CAT I, Basic)
Two GUARD. banana sockets....................... GUARD (600V CAT IV, Double)
Guard resistance ........................................... 200 k 10 %
DISCHARGING
Every time after measurement completion.
Discharging resistance: ................................. 300 k 10 %
RS232 SERIAL COMMUNICATION
RS232 serial communication......................... galvanic separated
Baud rates: .................................................... 4800, 9600, 19200 baud, 1 stop bit,
no parity.
Connector:..................................................... standard RS232 9-pin D female.
USB COMMUNICATION
USB slave communication............................. galvanic separated
Baud rates ..................................................... 115000 baud,
Connector...................................................... standard USB connector - type B.
CLOCK
Built-in Real time clock .................................. Displayed permanently and stored as a
parameter in combination with the result.
To Previous Page
Loading...
Need help?
General
