MI 3201 TeraOhm 5 kV Plus Measurements
44
7.4 Cleaning
Use a soft cloth, slightly moistened with soapy water or spirit to clean the surface of the
instrument and leave the instrument to dry totally before using it.
Notes!
Do not use liquids based on petrol or hydrocarbons!
Do not spill cleaning liquid over the instrument!
7.5 Calibration
It is essential that all measurement instruments be regularly calibrated. For occasional
daily use we recommend an annual calibration to be carried out. When the instrument is
used continuously every day, we recommend calibrating the instrument every six
months.
7.6 Service
For repairing under or out of warranty period contact your distributor for further
information.
To Next Page
Loading...
