Metrohm 794 Basic Titrino User Manual

2.3. Text input
794 Basic Titrino
8
2.3 Text input
<USER METH>
<USER METH>
<ENTER>
<CLEAR>
<<>
<QUIT>
<ENTER>
Example storing a method:
• Press key <USER METH>, the group ">recall
method" appears.
• Choose ">store method" by pressing <USER
METH> and press <ENTER>.
The name of the method which is currently in the
working memory is displayed.
• Delete this name with <CLEAR>.
• Open the "text writing mode" with key <<>.
• Select the character marked by the blinking cursor
with the Keys <<> and <>>, confirm it with
<ENTER>. Select the next character...
When you confirmed the last character, i.e. your
name is complete, you quit the text writing mode
with <QUIT>.
Confirm now the name with <ENTER>.
If your text fills the whole text field, just press
<ENTER> to store the text.
• During text input you can correct typing errors with
<CLEAR>:
<CLEAR> deletes the characters one by one.
• If you wish to modify an existing name (e.g. if you
have names like Text 1, Text 2, Text 3), do not delete
the existing name before you start the text input
mode. Proceed then as follows:
1. Press <USER METH>, place the cursor to
">store method" and press <ENTER>.
2. Open the text writing mode directly: Press key
<<>.
3. <CLEAR> now deletes the characters one by
one or you can add additional characters.
user methods
>recall method
>store method
method name:
>store method
method name: ABCDEFG
>store method
method name: text

Metrohm 794 Basic Titrino Specifications

General

Brand	Metrohm
Model	794 Basic Titrino
Category	Laboratory Equipment
Language	English