Metrohm 794 Basic Titrino - Storage and Loading of Methods

2.4. Tutorial
794 Basic Titrino
16
2.4.3 Storage and loading of methods
Now store the method you have just developed in the method memory.
Storage of a method
2 × <USER METH>
<ENTER>
<ENTER>
• Press <USER METH> repeatedly until the title
">store method" appears in the display.
• Open the inquiry with <ENTER>.
• Enter an identifier, e.g. 1 or Acid.
For text input see page 8.
The method now runs under the name "Acid". It is ready
to titrate.
If you have a printer connected, you can print out the contents of your method memory.
Key sequence: <PRINT><USER METH><ENTER>
Stored methods can be loaded at any time.
Loading a method from the method memory
<USER METH>
<ENTER>
<SELECT>
or
direct entry
<ENTER>
• Press <USER METH>. The display shows the title
">recall method".
• Open the inquiry <ENTER>
•
Y
ou can select the desired method with <SELECT>
(it shows all methods of the method memory one af-
ter the other) or by directly enter the method name.
• Load the method with <ENTER>
The method is ready to titrate.
user methods
>store method
>store method
method name: ********
DET pH Acid
user methods
>recall method
>recall method
method name: ********
DET pH Acid