Metrohm 794 Basic Titrino - Page 95

3.2 Remote control commands
794 Basic Titrino
91
*Parameter Tree part "Parameters for TIP"
├ .Sequence Sequence
│ ├ .1 Step 1
│ │ ├ .Select Step selection method,pause,L4 output,L6 output,
│ │ info, OFF 3.2.2.42.
│ │ ├ .Method Method from memory special 3.2.2.43.
│ │ ├ .Pause Waiting time 0...999 999, INF ditto
│ │ ├ .L4Output Line L4 active,inactive,pulse,OFF ditto
│ │ ├ .L6Output Line L6 active,inactive,pulse,OFF ditto
│ │ ├ .Info Display information up to 16 ASCII char. ditto
│ │
├
.Statistics Statistics
│ ├ .Status Status of statistics calculation ON, OFF 3.2.2.23.
│ ├ .MeanN No. of individual determinations 2...20 ditto
│ ├ .ResTab Result table
│ │ ├ .Select original,delete n,delete all ditto
│ │ ├ .DelN Deletion of individual results 1...20 ditto
│ │
├
.Presel Preselections
│ ├ .IReq Request of Id's after start id1, id1&2, all, OFF 3.2.2.25.
│ ├ .SReq Request of sample size after start value, unit, all, OFF ditto
│ ├ .MeasMode Measuring mode for man.meas. pH,U,Ipol,Upol,T,OFF 3.2.2.44.
│ ├ .MeasInput Measuring input 1, 2, diff. ditto
│ ├ .Ipol Polarization current 0...1...±127 ditto
│ ├ .Upol Polarization voltage 0...400...±1270 ditto
│ ├ .PolElectrTest Test for polarized electrodes ON, OFF ditto
│ ├ .Temp Titration temperature -170.0...25.0...500.0 ditto