Metrohm 838 Advanced Sample Processor User Manual

2.2 Configuration
Metrohm 838 Advanced Sample Processor, Operation 17
The run sequences of the Sample Processor will be stopped when input
line 6 is activated (low level). The technical details can be found in the
8.789.1033 Technical Reference of the Sample Processors.
>auxiliaries
>>running time meter
Submenu for running time meter, open
with <ENTER>
Shows the elapsed time
>>running time meter
elapsed time 0.0 h
0…9999 h
Warning limit for running time
meter
>>running time meter
warning OFF h
OFF, 0…9999 hours
The running time meter is used to support the regular mainte-
nance of the Sample Processor. If a warning limit is entered then,
when this period has elapsed, a message will appear indicating
that maintenance is required.
>auxiliaries
device label
Name of the instrument
for identification
8 ASCII characters
>auxiliaries
program 5.838.0012
Program version
read only

Metrohm 838 Advanced Sample Processor Specifications

General

Brand	Metrohm
Model	838 Advanced Sample Processor
Category	Laboratory Equipment
Language	English