Metrohm 838 Advanced Sample Processor User Manual

2.3 Composition of a method
Metrohm 838 Advanced Sample Processor, Operation 27
2.3.2 Sample Processor settings
parameters
>changer settings
Submenu for setting the Sample Processor functions
Open the submenu with <ENTER>
>changer settings
rack name: *
The sample rack assigned to the method
*,10 ASCII characters * = no particular rack
With this setting the user can be forced to use a particular rack for the se-
lected method. If this is not required then
rack name: * must be selected.
>changer settings
lift rate T1 25 mm/s
Vertical movement rate of the lift
5…25 mm/s
>changer settings
shift rate 20°/s
Speed at which the rack rotates
in degrees per second
3…20
>changer settings
shift direction: auto.
Direction of rotation of the sample rack
+,–,auto. auto. = the Sample Processor selects the shortest
path for the rotation itself.
>changer settings
rotat. increment: 5.00°
Increment angle for the command
MOVE +/-rotate
0.00…5.00…270.00°
>changer settings
swing rate T1 55°/s
Swing rate of the robotic arm in de-
grees/second
10…55
>changer settings
swing increment 10.00°
Increment angle for the command
MOVE +/-swing
0.00…10.00…180
>changer settings
on beaker error: MOVE
Definition of reaction if beaker is missing
Not implemented.

Metrohm 838 Advanced Sample Processor Specifications

General

Brand	Metrohm
Model	838 Advanced Sample Processor
Category	Laboratory Equipment
Language	English