Metrohm 838 Advanced Sample Processor

2.3 Composition of a method
Metrohm 838 Advanced Sample Processor, Operation 33
Command Teachable parameter Mode of function
LIFT
Lift position in mm
absolute
PERISTALT
Pump time in sec
additive
PUMP
Pump time in sec
additive
WAIT
Waiting time in sec
additive
SCN Rm
Status of the 8 remote lines "live" value
SCN RS
Character sequence received
"live" value
2.3.9 TRACE-Funktion
START
The "TRACE" function is a valuable aid for operating through an entire
sequence or method (or parts thereof) for test purposes. Every com-
mand line in a sequence can be executed directly by pressing the
<START> key. Upon completion of the action the next command line
is displayed.
Tracing can be executed immediately after entry of a sequence line or
at any time after opening the parameter menu and selecting a se-
quence.