Metrohm 838 Advanced Sample Processor User Manual

2.4 Commands
Metrohm 838 Advanced Sample Processor, Operation 37
p. 20). The rest position is the zero position (0 mm) of the particular lift,
i.e. its upper stop.
The lift speed can be set in the parameter menu under
>sample
changer settings or altered in a sequence with the appropriate DEF
command.
Each lift can be positioned with an accuracy of one millimeter. The
LEARN function is available for this (see p. 70).

Metrohm 838 Advanced Sample Processor Specifications

General

Brand	Metrohm
Model	838 Advanced Sample Processor
Category	Laboratory Equipment
Language	English