Metrohm 892 - Page 17

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
2 Overview of the instrument
892 Professional Rancimat
￭￭￭￭￭￭￭￭
9
5
Conductivity display block B
Shows the measured conductivity.
Dash (-) is displayed = Conductivity cannot
be displayed (no sensor connected or no
valid measuring signal).
6
Gas flow display block B
Shows the gas flow measured on block B
(gray background: gas flow switched off;
white background: gas flow switched on).
7
Temperature display block B
Shows the temperature measured on block
B (gray background: heater switched off; red
background: temperature not stable; green
background: temperature stable).
8
Temperature display block A
Shows the temperature measured on block
A (gray background: heater switched off;
red background: temperature not stable;
green background: temperature stable).
9
Gas flow display block A
Shows the gas flow measured on block A
(gray background: gas flow switched off;
white background: gas flow switched on).
10
Conductivity display block A
Shows the measured conductivity.
Dash (-) is displayed = Conductivity cannot
be displayed (no sensor connected or no
valid measuring signal).