￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
4 Operation
912/913/914 Meter
￭￭￭￭￭￭￭￭
31
4.5.3 Operation in the main dialog
Accessing the menu structures
You can access the menu structures via the Menu item (15-2) in the main
dialog.
1
Select the entry point with the or arrow keys.
2
Use the key to change to the menu structures.
Toggling from one-channel to two-channel view
The view can be changed in instruments with two measuring channels.
Three views can be displayed as follows:
￭ Display with both measuring channels.
￭ Display with measuring channel 1 and the data ID1, ID2 and User.
￭ Display with measuring channel 2 and the data ID1, ID2 and User.
1
You can toggle between the views as needed with the or
arrow keys.
Printing and/or saving measured values
Measured value recording is started with the Print/save measured
value button.
￭
- Printing the measured values.
￭ - Printing and saving the measured values.
￭ - Saving the measured values.
The respective triggering is determined by the settings in the menu:
￭ Menu ▶ Measured values ▶ Values
and
￭ Menu ▶ Measured values ▶ Data
(see chapter 4.7.4, page 46).
To Next Page
Loading...
Need help?
General
