Metrohm 913 - Changing the User

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
4 Operation
912/913/914 Meter
￭￭￭￭￭￭￭￭
35
3
Apply the data value and exit the selection window with the
key.
4.5.7 Changing the user
The user can be set to two different dialog types in the instrument (see
chapter 4.7.8, page 57).
Routine
Changing the instrument to the User Routine:
1
Switch to the selection dialog Menu ▶ User ▶ Dialog type
2
Select the Dialog type Routine.
The instrument's functions are limited for the user and the key icon
is displayed in the main menu.
Expert
Changing the instrument to the User Expert:
1
Switch to the selection dialog Menu ▶ User ▶ Dialog type
2
Select the Dialog type Expert.
3
Switch to the selection dialog Menu ▶ User ▶ Password
4
Enter the Password set on the instrument and confirm with the
icon.
The instrument's functions are fully accessible and the key icon
is no longer displayed in the main menu.