Metrohm 913 - Report

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
4 Operation
912/913/914 Meter
￭￭￭￭￭￭￭￭
55
4.7.5.3 Delete sensor
Delete sensor
Selection dialog for deleting a sensor.
The data will be irreversibly deleted.
4.7.6 Report
The Report menu dialog is shown below with the structure and the
description.
NOTICE
Printer
912/913/914 Meter instruments support various printer types for report
output. If your printer is not listed, please use the printer
Universal (ESC-POS), which has appropriate setting parameters.
Report
Selection dialog for data output in the Report.
￭ Calibration pH
￭ Calibration pH IS
￭ Calibration κ
￭ Calibration DO
￭ Sensors
￭ Configuration
￭ Parameters pH
￭ Parameters pH IS
￭ Parameters κ
￭ Parameters DO
￭ Meas. values
￭ All reports
Line feed
Editing dialog to indicate the lines to be inserted at the end of the report.
￭ Default value: 2 lines / input range: 0 - 99 lines
Printer
Selection dialog to indicate the printer for report output.
￭ HP Officejet Pro
Page printer with paper size A4
￭ HP Laserjet Pro
Page printer with paper size A4
￭ Epson (ESC-POS)
Roll printer with paper width 80 mm
￭ Seiko (ESC-POS)
Roll printer with paper width 110 mm
￭ Citizen (ESC-POS)
Roll printer with paper width 80 mm