Metrohm 913 - Page 64

4.7 Menu dialogs
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
54
￭￭￭￭￭￭￭￭
912/913/914 Meter
￭ Pt1000
￭ NTC
– R(25°C)
Editing dialog
Default value: 30000 Ω / input range: 10000 - 100000 Ω
– B value
Editing dialog
Default value: 4100 Κ / input range: 1000 - 9999 Κ
pH
Slope limit value Selection dialog for selecting whether the limit value is to be applied.
￭ on
￭ off: is the default value
pH
Slope lower limit Editing dialog for entering the lower limit value.
￭ Default value: 95.0 / input range: 1.0 - 999.9%
pH
Slope upper
limit
Editing dialog for entering the upper limit value.
￭ Default value: 103.0 / input range: 1.0 - 999.9%
pH
Limit value
pH(0)
Selection dialog for selecting whether the limit value is to be applied.
￭ on
￭ off: is the default value
pH
pH(0) lower limit Editing dialog for entering the lower limit value.
￭ Default value: 6.40 / input range: 0.00 - 99.99
pH
pH(0) upper
limit
Editing dialog for entering the upper limit value.
￭ Default value: 8.00 / input range: 0.00 - 99.99
K
Limit value c Selection dialog for selecting whether the limit value is to be applied.
￭ on
￭ off: is the default value
K
c lower limit Editing dialog for entering the lower limit value.
￭ Default value: 0.400 /cm / input range: 0.001 - 500 /cm
K
c upper limit Editing dialog for entering the upper limit value.
￭ Default value: 0.550 /cm / input range: 0.001 - 500 /cm