METRON QA-1290 - QA-1290 Startup; QA-1290 Main Menu

Pressing and holding down one of the 11 alphanumeric keys causes it
to move automatically from character to character. For example,
pressing the “1 ABC” key and holding it down will scroll you auto-
matically through “1”, then “A”, “B” and “C”. Release the key when
the desired alphanumeric character appears.
3.3 QA-1290 Startup
When QA-1290 is switched ON the following screens are displayed
in sequence. First, the system’s boot software and firmware versions
are displayed. Then, QA-1290 performs a self-check and prompts
you to zero the pressure before advancing to the Main Menu. (See be-
low)
****************************************
** M E T R O N **
** Boot software ver X.XX **
****************************************
****************************************
** METRON QA-1290 **
** Version. X.XX Date. XX.XXXXXX XXXX **
****************************************
****************************************
** METRON QA-1290 **
** Self Check. please wait......... **
****************************************
****************************************
** Pressure: x mmHg **
** Press any key to zero pressure **
****************************************
3.4 QA-1290 Main Menu
All QA-1290 operations start from the Main Menu, which consists of
two screens. They control the type tests to be conducted, and enable
you to configure QA-1290 settings and store them for use in testing.
Equipment Code .....> F7
Leak Test ............................> F6
BP Test ..............................> F5
MORE SET UP
F1 F2 F3 F4
3-3