Need help?Do you have a question about the Metso VALVCON V-Series and is the answer not in the manual?
General| Brand | Metso |
|---|---|
| Model | VALVCON V-Series |
| Category | Controller |
| Language | English |
Defines the manual's purpose and scope for Valvcon V-Series electric actuators.
Explains the information found on the actuator identification label.
Highlights crucial safety warnings for operating and handling the actuator.
Details the function and features of the VC002975 control board for modulating applications.
Explains the five operating modes (Run, Manual, Set Span, Set Zero, CAL) of the control board.
Describes key features like the ENTER button, signal selection, and fail position switches.
Outlines the proper wiring procedures for the control board and associated components.
Covers the setup and operation of actuators for modulating control signals.
Step-by-step guide for initial setup of the control board and signal selection.
Instructions on how to calibrate the position tracking potentiometer.
Procedures for setting the actuator's zero and span travel limits.
Guidance on correctly reinstalling the actuator cover after maintenance.
Steps to confirm that the zero and span positions have been set correctly.
Instructions for installing the control board into the actuator.
Lists the necessary tools for board installation.
Detailed steps for physically installing the control board and its components.
Describes the self-adhesive heater strip and thermostat for temperature control.
Details the ISO 5211 compliant output coupling options for valve mounting.
Explains the function and installation of the mechanical brake option.
Covers the potentiometer feedback option for position signal output.
Describes the dual auxiliary limit switches for position indication or interlocking.
Details the standard heater and thermostat option for temperature management.
Explains the keyed output options for secure shaft connection.
Describes the handwheel option for manual actuator operation.
Specifies the available operating voltages for the V-Series actuators.
Lists the enclosure types (W, WX) and their respective certifications.
Provides essential wiring information and warnings for AC voltage actuators.
Explains duty cycle ratings and thermal overload protection for the motor.
Specifies the ambient temperature range for actuator operation.
Details how and in what positions the actuator can be mounted.
Instructions on how to operate the actuator using the manual override shaft.
Information regarding the permanent lubrication of internal components.
Tips and common issues to prevent during installation and operation.
Outlines the terms and duration of the actuator warranty.
Provides contact information for service, repairs, and ordering spare parts.
Presents dimensional drawings and specifications for LV and V-Series actuators.
Shows an exploded diagram of the actuator with part numbers for spares and options.
To Next Page
