Metso VALVCON V-Series - Default Chapter; Table of Contents

1. GENERAL .................................................................. 3
1.1 Scope of the Manual ................................................... 3
1.2 Actuator Markings ........................................................ 3
1.3 Saftey Precautions .........................................................3
2. TRANSPORTATION AND STORAGE ........................ 3
3. GENERAL INSTALLATION INFORMATION ............. 3
3.1 Description of Control Board ....................................3
3.2 Operating Modes........................................................... 4
3.2.1 Features, Settings and Controls..................... 4
3.3 Control Board Wiring .................................................... 5
3.4 Operation for Modulating Applications ............... 5
3.4.1 Set Up for Operation ......................................... 5
3.4.2 Potentiometer Calibration .............................. 5
3.4.3 Setting ZERO and SPAN positions ................ 6
3.4.4 Proper Actuator Cover Installation ............... 7
3.5 Board Installation .......................................................... 8
3.5.1 Tools Required ..................................................... 8
3.5.2 Installation Instructions ................................... 8
4. VSERIES STANDARD OPTIONS ............................. 8
4.1 Option “H” – Tropical Heater and Thermostat ..... 8
4.2 Option “I” – ISO 5211 Output ..................................... 9
4.3 Option “K” – Mechanical Brake ................................ 9
4.4 Option “P” – Feedback Potentiometer ................... 9
4.5 Option “S2” – Two Auxiliary Limit Switches .......... 9
4.6 Option “T” – Heater and Thermostat ...................... 9
4.7 Option “Y” - Keyed Output ......................................10
4.8 Option “Z” – Handwheel Override .........................10
4.9 Voltage ............................................................................10
5. GENERAL OPERATING INFORMATION ................ 10
5.1 Enclosure Ratings and Product Certications ... 10
5.2 Wiring ..............................................................................10
5.3 Duty Cycle and Motor Protection ..........................10
5.4 Operating Temperature Limits ...............................11
5.5 Actuator Mounting .....................................................11
5.6 Manual Override ..........................................................11
5.7 Lubrication .....................................................................11
5.8 Problem Prevention .................................................... 11
5.9 Warranty .........................................................................11
5.10 Repair Service/Spare Parts .......................................11
6. SPECIFICATIONS & TECHNICAL INFORMATION . 12
6.1 Dimensions ....................................................................13
6.2 Exploded View ..............................................................14
7. VSERIES ACTUATORS BY MODEL NUMBER ....... 15
8. ADDITIONAL ACTUATOR PRODUCTS .................. 16
TABLE OF CONTENTS
IMO 11/17
2 IMO-I2500 EN
READ THESE INSTRUCTIONS FIRST!
These instructions provide information about safe handling and operation of the actuator.
If you require additional assistance, please contact the manufacturer or manufacturer’s representative.
Addresses and phone numbers are printed on the back cover.
See also www.metso.com/electricactuators for the latest documentation.
SAVE THESE INSTRUCTIONS!
Subject to change without notice.
All trademarks are property of their respective owners.