WARNING
!
Do not tow with sling-type
equipment. Use wheel lift or
flatbed equipment.
b. Towing with a wheel lifter
Step 1: Installing the Removable
Towing Hook:
1. Open the tailgate and take out the
towing hook from the tool case.
2. Remove the hole cover:
l Open the lower part of the
bumper hole cover with the
help of screw driver.
3. Insert the towing hook into the hole
and turn it clockwise until it is fully
tightened.
4. After use, remove the towing hook
and reinstall the cover.
Please ensure that the towing hook
is tightened properly. If not, during
towing the towing hook may be
thrown o the vehicle resulting in
serious injury or accident.
CAUTION
Step 2 :
a. Turn on the hazard warning lamp.
b. Power o the vehicle.
c. Release the parking brake.
d. Front wheels must be o the
ground when towing.
When towing the vehicle with a
flatbed trailer, check that it is firmly
fixed to the trailer.
NOTE
Failure to properly tighten the
towing hook may result in vehicle
damage and damage of related
parts.
!
5
EMERGENCY & BREAKDOWN
R e p a i r & M a i n t e n a n c e
5-7
To Next Page
Loading...
