Micom 3T - Page 46

MICOM-3F/3T/3R HF-SSB Owner’s Guide
28
SQ (F3) toggles the squelch on/off.
MICOM-3
FREQ
SQUELCH ON
USB
SQ
BAND
SQ
DSP
I
DSP (F4) accesses the Digital Signal Processing menu, which
includes the following options:
MICOM-3
FREQ
DSP PARAM
USB
CLAR
NF
CLIP
NB
I
SQ
• CLAR (F1) – controls the clarifier (off/lower frequency/higher
frequency)
MICOM-3
FREQ
CLAR OFF
USB
SQ
<--
-->
• NF (F2) – controls the notch filter (off/lower frequency/higher
frequency
MICOM-3
FREQ
NF OFF
USB
SQ
-->
Note
The CLAR (F1) and NF (F2) function keys are not available for TXO (transmit
only) channels.
• CLIP (F3) – toggles the clipper on/off.
MICOM-3
FREQ
CLIP - OFF
USB
CLAR
NF
CLIP
NB
I
SQ
• NB (F4) – toggles the noise blanker on/off.
MICOM-3
FREQ
NB - OFF
USB
CLAR
NF
CLIP
NB
I
SQ
• ATTN (MORE, F2) – toggles the attenuator on/off.
MICOM-3
FREQ
ATTEN - ON
USB
ATTN
I
SQ
PWR (MORE, F1) – selects the transmit power level (LOW, MED,
HIGH or MAX).
MICOM-3
FREQ
POWER LOW
USB
LOW
MED
HIGH
MAX
SQ