Micom 3T - Default Chapter; Performance Specifications

MICOM-3F/3T/3R HF-SSB Owner’s Guide
Performance Specifications
MICOM-3F – Model M90AMNOKV5-K
MICOM-3T – Model M91AMNOKV5-K
MICOM-3R – Model M95AMNOKV5-K
General
Transmit Frequency Range
1.6 to 30 MHz
Receive Frequency Range
0.1 to 30 MHz (0.1 to 1.6 MHz reduced
performance)
RF Input Impedance
50 Ω
Number of Channels
200 simplex or half duplex, user programmable
Scanning
5 groups with up to 100 channels per group,
including 1 guard channel.
Programmable scan rate: 1 to 5 sec. per
channel, in 1 sec. steps
ALE
Per FED-STD-1045B and MIL-STD-188-141B,
JITC certified
Frequency Stability
0.6 ppm (0.1 ppm optional) @ -30° to 60°C
Frequency Drift (Aging)
1 ppm/year
Synthesizer Lock Time
10 msec. max.
Frequency Resolution
10 Hz
Operating Temperature Range
-30° to +60°C
Storage Temperature Range
-40° to +85°C
Humidity
Max. 95% @ 50°C
Remote Control Interface
RS-232C (optional)
Modes of Operation
• ]3E SSB
• R3E PILOT
• H3E AME
• J2A CW
• J2B RTTY, ARQ, FEC, PACKET, MCW
• B8C FAX, DATA, FSK
Operating Voltage
13. 8 VDC ±20%, negative ground
Dimensions
MICOM-3F
92 H × 302 W × 270 D mm
(3.7 H × 11.9 W × 10.7 D inch)
MICOM-3R
92 H × 302 W × 285 D mm
(3.7 H × 11.9 W × 11.3 D inch)
MICOM-3T
92 H × 302 W × 285 D mm
(3.7 H × 11.9 W × 11.3 D inch)
iv