Micom 3T - To Transmit an Individual Call with Multinet off

MICOM-3F/3T/3R HF-SSB Owner’s Guide
54
2. To change the currently used net, press the UP/DOWN keys,
or enter the net number on the keypad, and then press
ENTER.
MICOM-3
CALL
LQA
MON
ALE
NET 1 1
USB
MON
Calls to an Individual Station
➤ To transmit an individual call with MultiNet OFF:
1. Press CALL (F1).
The radio displays the last called address. This may be a station
address, or any other type of address (for example, net,
wildcard, etc.).
MICOM-3
SEND
PAGE
CHAN
CALL
1001
I
2. To select a different station:
Press the UP/DOWN keys to scroll between stations.
MICOM-3
CALL
1009
or
Use the keypad to enter a station name and then press SAVE
(F1) or ENTER when the required station name appears.
MICOM-3
SAVE
<--
-->
CLR
CALL
123
4
Note
When scrolling between stations with the UP/DOWN keys, every key pressing
displays destination addresses in the following order:
• The last called address
• The AIICall address (GL ALLCALL, or SL ALLCALL, if you used it instead of
GL ALLCALL)
• The current active net number
• The addresses of the members in the current net
• Other addresses in the directory.
3. Press SEND (F1) or ENTER to initiate the call.
MICOM-3
SEND
PAGE
MON
CALL
1234