ALE Programming
93
Auto Dial Parameters
Auto Dial enables you to set shortcuts for calls to frequently called stations, with or without
automatically attaching messages when a station is called:
• AUTO
Used to configure up to 10 autodial codes, numbered AUTO 0 to AUTO 9.
• AMD
Used to prepare AMD messages for sending when an autodial code is used. See
message preparation details on page 59.
Note
If a message is attached to the address, an exclamation mark precedes the
address.
Storing ALE parameters
Before exiting the ALE programming menu, you must store the parameters you have programmed.
Important
If you press the MENU or ESC key to exit programming mode without first
saving your changes, you will be prompted to store the ALE configuration
changes. Press YES to store the configuration.
If you press NO, the configuration will revert to the previous configuration,
and any changes made in the ALE programming session will be ignored.
To Next Page
Loading...
