EasyManua.ls Logo

Micom 3T - To Transmit a Wildcard Call

Default Icon
164 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Using Automatic Link Establishment (ALE)
71
Transmitting Wildcard Calls
Wildcard calls, that is, calls in which the destination address includes the wildcard character ?, let you
to simultaneously address multiple stations with a single address:
Any station receiving an address with wildcards stops scanning and checks the address length: if
the number of characters in the received address is different from the number of characters in its
own self-address, the station ignores the call.
If the received address matches the length, a receiving station checks the significant positions in
the received address against its own. For example, the stations JOHN and JOIN will both accept
a call with the address JO?N.
Each station accepting the call answers the calling station in a pseudo-random slot.
MICOM-3 will wait for responses for a certain time before entering the link state with all the stations
that responded within this interval (the maximum number of stations that are accepted in a wildcard
call is 16). Therefore, with the wildcard option, the link set up process takes more time, because the
radio waits longer to get responses (it cannot “guess” the number of stations that will answer).
Before continuing, you may wish to review pages 37 to 41, which present details on ALE addressing
(including the use of wildcards in addresses).
Note
Before starting, you may want to select a different net to use: see instructions on
page 53.
When MultiNet is enabled, you will be prompted for a net number as soon as you
press CALL (F1) to start a call.
To transmit a wildcard call:
1. Press CALL (F1).
The radio displays the last called address.
If you see the address you want (that is, you want to repeat the
last wildcard call), skip directly to Step 11 below, otherwise
continue as explained below.
MICOM-3
SEND
PAGE
CHAN
CALL
1001
I
2. Press MORE once.
MICOM-3
MULT
CALL
1001
I
3. Press MULT (F1) to display the first page of special calls.
MICOM-3
ALL
NET
GRP
ANY
CALL
I
4. Press MORE again to display the next page.
MICOM-3
WILD
SELF
CALL
I

Table of Contents

Related product manuals