Microhard Systems pMDDL2350 - Page 100

© Microhard 100
5.0 AT Command Line Interface
Administrative AT Commands (Continued)
AT Command Description Syntax Effect
AT+MASNMPTRAP Get/Set SNMP Trap AT+MASNMPTRAP[=<Mode>[,<Name>,<IP>[,<AuthFailureTraps>]]
<Mode>:
0 - Disable
1 - Enable
<Name>:
Trap Community Name. 1 to 32 characters
<IP>:
Trap Manage Host IP. Default 0.0.0.0 (Disable)
<AuthFailureTraps>:
0 - Disable
1 - Enable
Usage:
AT+MASNMPTRAP
AT+MASNMPTRAP=0
AT+MASNMPTRAP=1[,<Name>,<IP>[,<AuthFailureTraps>]]
AT&W
Serial Port AT Commands
AT Command Description Syntax Effect
AT+MCPS2 Get/Set Serial port AT+MCPS2=<Mode>
Parameters:
COM2 Mode:
0 - Console
1 - Data
AT&W
AT+MCBR2 Get/Set Serial port baud rate AT+MCBR2=<Baud Rate Type>
Parameters:
COM2 Baud Rate Type:
0 - 300
1 - 600
2 - 1200
3 - 2400
4 - 3600
5 - 4800
6 - 7200
7 - 9600
8 - 14400
9 - 19200
10 - 28800
11 - 38400
12 - 57600
13 - 115200
14 - 230400
15 - 460800
16 - 921600
AT&W
AT+MCDF2 Get/Set Serial port data format AT+MCDF2=<Data Formate Type>
Parameters:
COM2 Data Formate Option:
0 - 8N1
2 - 8E1
3 - 8O1
AT&W
AT+MCDM2 Get/Set Serial port data mode AT+MCDM2=<Data Mode Type>
Parameters:
COM2 Data Mode Option:
0 - Seamless
1 - Transparent
AT&W
AT+MCCT2 Get/Set Serial port character timeout AT+MCCT2=<timeout>
Parameters:
COM2 timeout: 1 to 65535 in seconds
AT&W
AT+MCMPS2 Get/Set Serial port maximum packet size AT+MCMPS2=<size>
Parameters:
COM2 maximum packet size: 1 to 2048
AT&W
AT+MCNCDI2 Get/Set Serial port no-connection data intake AT+MCNCDI2=<Mode>
Parameters:
COM2 Mode Option:
0 - Disable
1 - Enable
AT&W
AT+MCMTC2 Get/Set Serial port Modbus tcp configuration AT+MCMTC2=<Status>
Parameters:
COM2 Modbus Status:
0 - Disable
1 - Enable
AT&W