English-76
004-1055-00
TP210 Rev. A
© 2013 Midmark Corp. | 60 Vista Drive Versailles, OH 45380 USA | 1-800-643-6275 | 1-937-526-3662 |
[Revised: mo/dd/yr]
Base Cover
Base Cover Removal / Installation
To remove base cover...
A) Remove three screws.
B) Lift cover off of base.
To install base cover...
A) Position cover on base.
B) Secure with three screws.
WARNING
Always disconnect table from power source before removing
any covers. Failure to do so may result in personal injury.
Troubleshooting Chart .................................... 2
Error Code Chart .......................................... 15
Troubleshooting Chart .................................... 2
Error Code Chart .......................................... 15
To Next Page
Loading...