Operation
28
Using the oven - Further func‐
tions
Setting further durations
You have placed the food in the oven,
selec
ted a temperature and a duration.
Select Change.
Further options will appear in the dis‐
play which you can select or change for
your pr
ogramme:
– Ready at
– Start at
You can set the programme to switch
off or on and off automatically by set‐
ting Ready at or Start at.
– Ready at
You specify the time you want cook‐
ing t
o stop.
– Start at
You specify the time you want cook‐
ing t
o start.
Cooking results can be impaired if
ther
e is a long delay between the
food being placed in the oven and
the start of cooking. Fresh food can
change colour and even deteriorate.
If the temperature in the oven is too
hig
h, e.g. just after another pro‐
gramme, you will not be able to use
this function. Ready at / Start at will not
appear in the display if this is the
case. Open the oven door until the ap‐
pliance has cooled down.
Switching on and off automatically
To switch a cooking programme on and
off aut
omatically you have a choice of
how to enter the time parameters:
– Garzeit and Ready at
– Garzeit and Start at
Example: it is 11:45. The food takes 5
minu
tes to cook and should be ready at
12:30.
Select ändern.
Select Garzeit
and set a duration of
00:05.
Select Ready at and set 12:30.
Confirm with OK.
Start at is cal
culated automatically. The
cooking duration entered is added to
the heating-up time calculated by the
steam oven.
Start at 12
:18 appears in the display.
The cooking process will start automat‐
ically at this time.
To Next Page
Loading...
