Settings
88
Showroom programme
This function enables the steam oven to
be d
emonstrated in showrooms without
heating up. It should not be set for do‐
mestic use.
Demo mode
If demo mode is activated Demo mode
active. The appliance will not heat up will
appear when the st
eam oven is
switched on.
– On
Touch the sensor next to OK for at
least 4 secon
ds to activate demo
mode.
– Off
Touching the sensor next to OK for at
least 4 secon
ds will deactivate Demo
mode. You can then use the steam
oven as normal.
Factory default
– Settings
Any settings that you have altered
will be r
eset to the factory default
setting.
– User programmes
All user programmes will be deleted.
– Recommended temps.
Recommended temperatures which
have been chan
ged will be reset to
the factory default settings.
To Next Page
Loading...
