EasyManua.ls Logo

Miele DG 6500 - System and Water Hardness Settings

Miele DG 6500
116 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Settings
87
Safety
System lock
The system lock prevents the appliance
being switched
on by mistake.
The minute minder can still be used
w
hen the system lock is active.
The system lock will remain activated
ev
en after a power failure.
On
The system lock is active. If you want
t
o use the steam oven touch the sen‐
sor next to OK for at least 6 seconds.
Off
The system lock is not active. You
can use the st
eam oven as normal.
Sensor lock
The sensor lock prevents the oven be‐
in
g switched off or settings altered by
accident whilst in use.
On
The sensor lock is active. Touch the
sensor ne
xt to OK for at least 6 sec‐
onds to use the sensors again. The
sensor lock is then deactivated for a
short period.
Off
The sensor lock is not active. All sen‐
sors react to touch as normal.
Water hardness
The steam oven is set ex-works for Hard
wat
er. It must be adjusted to local water
hardness to ensure trouble-free opera‐
tion and to ensure that descaling is car‐
ried out at the correct interval. The
harder the water, the more often it will
need to be descaled.
Soft
< 8.4 °dH, < 1.5 mmol/l
mittel
8.4 - 14 °dH, 1.5 - 2.5 mmol/l
Hard
> 14 °dH, > 2.5 mmol/l

Table of Contents

Other manuals for Miele DG 6500

Related product manuals