Filling the reservoirs
,
Important: Both reservoirs must
always be filled with the same liquid
agent.
,
Only fill the duo-dispensing
system with neutralising agent or
rinsing agent formulated for
dishwashers. Do not fill with
cleaning agent. This would damage
the reservoirs.
^
Open the door fully.
^
Undo the screw caps.
^
Add liquid agent until the level
indicator is dark (see arrow on
illustration). Use a funnel if
necessary.
Each reservoir holds approx. 180 ml.
^ Screw the caps back on.
^ Mop up any spilt liquid agent. This
prevents over-foaming occurring
during the next programme.
Dispensing chemical agents
31
To Next Page
Loading...
