Adjusting dosage
The dosage selector in each opening
has settings adjustable from 1 to 6
(1-6 ml). As factory default they are
set to 5 for dispensing neutralising
agent, which is equivalent to a total
dosage of 10 ml (2 x 5 ml).
For dispensing rinsing agent Miele
recommend a total dosage of 4 ml (2 ml
for each reservoir).
If spots appear on items:
^
When using neutralising agent
select a lower dosage.
^
When using rinsing agent select a
higher dosage.
If clouding or smearing appears on
items:
^
When using neutralising agent
select a higher dosage.
^
When using rinsing agent select a
lower dosage.
Dispensing neutralising agent via the
DOS module (optional)
A neutralising agent can be dispensed
via the optional DOS module G 10
(DOS 3, dispensing pump for
neutralising agent). The machine must
be set up for this by a Miele approved
service technician. The DOS module is
fitted exernally.
In order to dispense neutralising
agent via a DOS G 10 module the
duo-dispensing system in the door
has to be reprogrammed to accept
rinsing agent.
Dispensing chemical agents
32
To Next Page
Loading...
