Activating Rinse 2
A second interim rinse can be programmed in to improve interim rinsing in all
programmes except for PRE-RINSE D (see Programme Chart).
Step Display / Result
^
Press 3 until E01 appears.
E01
^
Turn the programme selector to the 5 o'clock
position.
50 Rinse 2 not activated
51 Rinse 2 activated
^
Press 4 repeatedly or hold pressed in until the
required number appears in the display, e.g. 51.
51
Value set:
To use AD water in the programme section "Rinse 2" the machine has to be
programmed by a Miele service technician.
Programmable functions
44
To Next Page
Loading...
